1. Home
  2. Products
  3. Electrical Reactor
  4. 10KV Series Reactor

10KV Series Reactor

10KV Series Reactor

Applications
Our CKSC 10KV series dry-type reactor can be applied in electrical systems under 35 kilovolts with high-voltage capacitors. The reactor can effectively reduce higher harmonics, limit inrush currents and switching surges, and make the power system work better with added safety and higher quality. Besides, the reactor can also eliminate short-circuit currents, and absorb harmonics in filters.

Environment requirements
1. Altitude under 2000 meters.
2. Working temperature -25℃~ 45℃, relative humidity under 90%.
3. No noxious fumes in the environment and no flammable objects should be around.
4. Good airiness. Ventilation devices are required if the product is used in a cabinet.

Technical parameters
1. Our 10KV series dry-type reactor is compatible with electrical systems of 400V and 660V.
2. Reactance: 1%, 4.5%, 5.6%, 6%, 7%, 12%, 13.8%, 14%.
3. Rated insulation level 3KV/min.
4. Temperature increase limits: iron core ≤ 85K, coil ≤ 95K.
5. Noise level ≤ 45dB
6. Overload capacity: continuous working is guaranteed when overload rate is under 1.35.
7. Degree of linearity: the reactance drop is lower than 5% when working on 1.8 times of rated current.
8. Reactance error under ±3%.
9. Temperature classification: H (180℃).

Specifications
Reactor model Matching
capacitor 		Reactor capacity
(Kvar) 		Inductance
(mh) 		Outline size
LxWxH(mm) 		Install size
(mm)
CKSC-6/10-6% 100 6 3X233.223 650x360x660 400x320
CKSC-9/10-6% 150 9 3X153.514 700x360x670 400x320
CKSC-12/10-6% 200 12 3X115.501 720x380x700 400x320
CKSC-18/10-6% 300 18 3X77.246 730x380x700 400x320
CKSC-27/10-6% 450 27 3X51.388 780x400x710 450x350
CKSC-30/10-6% 500 30 3X46.289 800x400x750 450x350
CKSC-36/10-6% 600 36 3X38.500 800x400x750 450x350
CKSC-45/10-6% 750 45 3X30.781 800x400x750 450x350
CKSC-54/10-6% 900 54 3X25.694 830x400x780 450x350
CKSC-60/10-6% 1000 60 3X23.100 850x400x800 500x350
CKSC-72/10-6% 1200 72 3X19.250 850x400x800 500x350
CKSC-90/10-6% 1500 90 3x15.410 900x400x850 500x350
CKSC-108/10-6% 1800 108 3x12.833 920x400x850 500x350
CKSC-126/10-6% 2100 126 3x11.005 950x420x900 500x380
CKSC-144/10-6% 2400 144 3x9.625 960x420x920 500x380
CKSC-162/10-6% 2700 162 3x8.559 1000x450x1050 550x400
CKSC-180/10-6% 3000 180 3x7.700 1000x450x1050 550x400
CKSC-198/10-6% 3300 198 3x7.002 1000x450x1100 550x400
CKSC-216/10-6% 3600 216 3x6.420 1100x480x1150 600x400
CKSC-240/10-6% 4000 240 3x5.778 1100x500x1200 600x420
CKSC-252/10-6% 4200 252 3x5.503 1150x500x1200 600x420
CKSC-288/10-6% 4800 288 3x4.814 1200x520x800 600x420
CKSC-300/10-6% 5000 300 3x4.622 1200x550x1250 600x420
CKSC-360/10-6% 6000 360 3x3.851 1350x600x1300 650x430
CKSC-480/10-6% 8000 480 3x2.888 1610x800x1700 1000x700

Note
The tables above show our standard product lines. Customize service is also provided to meet other requirements. Some of our product sizes may have changed due to product improvements.

Features
1. Two kinds of dry series reactors with iron cores are provided: three-phase and single-phase.
2. The iron cores are made from cold rolled silicon steel of good quality. The high speed punching in the material processing provides clean material with smaller burrs.
3. Coils are made from well insulated wires with special appliance, and the surfaces of coils are smooth.
4. All the clamping devices are made of non-magnetic material and are corruption-proof. The drying, vacuum varnishing and drying process ensures the tightness of reactor coils, significantly reduces useless heat and noises and adds to the high quality of series reactor.
5. The outer shell is designed accordingly to the standardized cabinet size. The device is small and wiring is very convenient.
Inquiry Form
Other Products