Electrical Reactor
-
-
- Low Voltage Series ReactorCKSG low voltage series reactor can be used in electrical systems and high voltage capacitor sets. By connecting the series reactor at the front end of capacitors, the harmonics in the system can be reduced, and help protect the capacitors from harmonics and surges.
-
-
- 10KV Series ReactorOur CKSC 10KV series dry-type reactor can be applied in electrical systems under 35 kilovolts with high-voltage capacitors. The reactor can effectively reduce higher harmonics, limit inrush currents and switching surges, and make the power system work better.
-
-
- Low Voltage Filter ReactorOur LKSG three-phase low voltage filter reactor can be applied in low voltage filter cabinets with series connection of filter capacitors. It can change the frequency of harmonics to a certain range, and absorbs harmonic currents in the electrical system.
-
-
- Three Phase AC Input ReactorThe ACL three phase AC input reactor can be applied at the input side of AC drives to limit the current and protect the device. Also our reactors can reduce surge current, improve power factors, suppress harmonics in the grid and improve the waveform of input current.
-
-
- Three Phase AC Output ReactorThe OCL three phase AC output reactor can provide smooth filtrations and lower the transient dv/dt. Our output reactor can also help reduce motor noises, avoid eddy current loss, reduce the leakage current caused by higher harmonics and protect the power switching devices in the inverter.
-
-
- High Voltage Motor Stating ReactorThe QKSC high voltage motor stating reactor can reduce the voltage when starting up an AC induction motor. This product is designed to match the starting process of high-voltage asynchronous motors, and us compatible with motors of 220V to 14000KW.
-
-
- Air Core ReactorWe provide a variety of air-core reactors which can be used for reactive power compensation, eliminating harmonics, limiting current and so on. The compatible voltage ranges from 0-35KV, and capacity 0-3500Kvar.